INPA/EDIABAS Windows 7 64bit Installation Guide. The cable I purchased is a USB to OBD2 connector that plugs into your BMW to the. Download the INPA/EDIABAS. Inpa k+can obd2 diagnostic interface is Interface USB OBD2 for BMW INPA/Ediabas. Ou can diagnose driver. 15.7 VCDS 12.12 software download nissan. BMW K-CAN D-CAN OBD2 Interface BMW Tools Driver & Software Installation. Please download the driver setup file from FTDI HERE BMW Tools that. FTDI Driver Note: The FTDI Windows XP/7 32bit drivers are included in the setup file and are automatically installed after the software installed. If you need the correct FTDI drivers for Windows 7 (64bit), Windows 8/8.1, please download the driver setup file from FTDI BMW Tools that will be installed: • INPA 5.06 (English) • EDIABAS 7.3.0 • NCS Expert 4.0.1 • NCS Dummy 0.6.04 • Tool32 4.03 • WinKFP 5.3.1 • BMW Coding Tool v2.5.0 (alternative to NCS Dummy or updating DATEN files) • Integrated SP-DATEN v53.3. Expand the Ports (COM & LPT) in device manager and look for 'USB Serial Port (COM X)' • X = the default COM port Windows assigned for the cable. We will need to change this to COM 1 in order for it to function properly. • Right click on 'USB Serial Port (COM X)' and click on 'Properties'. Go to the 'Port Settings' tab, then click 'Advanced.' • Change the 'COM Port Number' to COM1 • Change the ' Latency Timer (msec)' to 1 • Now click OK. If you get a warning that COM1 is being used by another device, click YES and continue to exit out of both windows. Test if the Port has been configured correctly. Unplug the USB cable and plug it back into the same port. Navigate to the Device Manager, Ports (COM & LPT) and you should see 'USB Serial Port (COM1).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
September 2018
Categories |